 |
| Quantity: | |
|---|---|
YH-5108
YOHO chemical
Product Introduction:
YH-5108 This product is a water-based acrylic emulsion, which can be used for the combination of corona treated BOPP film and printed paper products.
Product features:
It has the characteristics of strong compound fastness, bright color, no white spot, no yellow, not easy to blister, pressure grain resistance, etc.
Typical features:
Table 1 physical characteristics
Item Index Unite Derection method
Appearance Slight blue Visuel
Viscosity <200cp mPa·S Brookfield LVrator 25℃
Solid content 42±0.5 wt% GB/T 20623-2006 . 4.3
PH 7.0-8.3 GB/T 20623-2006 . 4.4
Method of application:
The laminating machine should be completely cleaned before use.The temperature of the hot roll of the laminating machine is raised to 60-90℃, and the temperature of the drying channel is raised to 60-130℃.
Pour the coated glue into the glue tank, start the coated roller to apply the glue evenly, and then the film can be coated without adding other solvents.
If the composite white plate paper coated with BOPP film, the adhesive liquid does not need to be completely dried, so that it can not be extruded from both sides of the film through the pressing roller: if the composite gold, silver card stock or printed with gold and silver ink products must be completely dried.
The coated product can be cut directly, and the peel strength can reach the highest value after 24 hours.
The speed of the machine, the drying track, the temperature of the hot
roller and the size of the glue amount should be flexibly grasped by the
user according to the equipment, the different types of products and the
actual situation.
Packing and storage:
Packaging product specifications are 50KG plastic drum, 150KG plastic
drum, 200KG (plastic drum), ton bag (plastic drum).
This product should be stored in a ventilated and dry room, prevent
direct sunlight, transport and storage at 5-35 ℃ , effective storage
period from the date of packaging for half a year.
Product Introduction:
YH-5108 This product is a water-based acrylic emulsion, which can be used for the combination of corona treated BOPP film and printed paper products.
Product features:
It has the characteristics of strong compound fastness, bright color, no white spot, no yellow, not easy to blister, pressure grain resistance, etc.
Typical features:
Table 1 physical characteristics
Item Index Unite Derection method
Appearance Slight blue Visuel
Viscosity <200cp mPa·S Brookfield LVrator 25℃
Solid content 42±0.5 wt% GB/T 20623-2006 . 4.3
PH 7.0-8.3 GB/T 20623-2006 . 4.4
Method of application:
The laminating machine should be completely cleaned before use.The temperature of the hot roll of the laminating machine is raised to 60-90℃, and the temperature of the drying channel is raised to 60-130℃.
Pour the coated glue into the glue tank, start the coated roller to apply the glue evenly, and then the film can be coated without adding other solvents.
If the composite white plate paper coated with BOPP film, the adhesive liquid does not need to be completely dried, so that it can not be extruded from both sides of the film through the pressing roller: if the composite gold, silver card stock or printed with gold and silver ink products must be completely dried.
The coated product can be cut directly, and the peel strength can reach the highest value after 24 hours.
The speed of the machine, the drying track, the temperature of the hot
roller and the size of the glue amount should be flexibly grasped by the
user according to the equipment, the different types of products and the
actual situation.
Packing and storage:
Packaging product specifications are 50KG plastic drum, 150KG plastic
drum, 200KG (plastic drum), ton bag (plastic drum).
This product should be stored in a ventilated and dry room, prevent
direct sunlight, transport and storage at 5-35 ℃ , effective storage
period from the date of packaging for half a year.
