YH-5109 BOPP AND CARDBOARD LAMINATING ADHESIVE/GLUE

Water-based laminating adhesive YH-5109

Product Introduction:

YH-5109 This product is a water-based acrylic emulsion, which can be used for the combination of corona treated BOPP film and printed  paper products.

Product features:

It has the characteristics of strong compound fastness, high transparency,no white cloud fog point, no curling, pressure resistance and so on.

Typical features:

Table 1 physical characteristics

Item              Index                 Unite             Detection method                                                            

Appearance      Slight blue                                                                                                                                                                        

Viscosity            <200                                      mPa.S                             Brookfield LVrator 25℃

Solid content          45±0.5              wt%                                   GB/T 20623-2006 . 4.3

PH                                                           7.0-8.0                                         GB/T 20623-2006. 4.4

Method of application:

The laminating machine should be completely cleaned before use.

The temperature of the hot roll of the laminating machine is raised to 60-90℃, and the temperature of the drying channel is raised to 60-130℃.

Pour the coated glue into the glue tank, start the coated roller to applythe glue evenly, and then the film can be coated without adding othersolvents.

If the composite white plate paper coated with BOPP film, the adhesive liquid does not need to be completely dried, so that it can not be extruded from both sides of the film through the pressing roller: printed ink products must be completely dried.

The coated product can be cut directly, and the peel strength can reach the highest value after 24 hours.

The speed of the machine, the drying track, the temperature of the hot roller and the size of the glue amount should be flexibly grasped by the user according to the equipment, the different types of products and the

actual situation.

Packing and storage:

Packaging product specifications are 50KG plastic drum, 150KG plastic

drum, 200KG (plastic drum), ton bag (plastic drum).

This product should be stored in a ventilated and dry room, prevent

direct sunlight, transport and storage at 5-35 ℃ , effective storage

period from the date of packaging for half a year.

Please note: the above data are typical characteristics of the product, not productspecifications, users need to test according to their own specific needs, so as todetermine your most suitable formula process.