 |
| Quantity: | |
|---|---|
YH-95
YOHO
YH-95 is polyolefin based.It has the advantages of environmental protection, good adhesion, fast curing, smooth operation, smokeless and odorless, no wire drawing, not easy to carbonize, etc. It is suitable for most of packages, coated color box, printing ink box, corrugated box, etc.
Product features:
1,Fast Bonding: Cures within seconds at room temperature, boosting efficiency.
2,Solvent-Free & Eco-Friendly: 100% solids, VOC-free, and safe for the environment.
3,Easy to Use: Apply by hot melt, bond upon cooling; pellets/sticks are easy to store and automate.
4,Wide Adaptability: Bonds wood, paper, plastic, fabric, metal; ideal for packaging, labeling, footwear, bookbinding, etc.
5,Reheatable: Thermoplastic - can be remelted for rework or repositioning.
Specifications:
Test Item | Test Method | Test Result |
Appearance | Visual Inspection | White / Transparent |
Softening Point | GB/T15332-1994 | 86±5ºC |
Viscosity at 180ºC | HG/T3660-1999 | 17500±2000 mPa·s |
Open Time | HG/T3716-2003 | 6-8 s |
Product pictures:
Equipment pictures:
Details:
1.Data above all is the controlled by ourselves, if any objection, please submit it within 7days.
2.The seller guarantee the quality and parameters of the goods correspond to the confirmed samples, parameters stated in General Specification and requirements. But hot melt glue sticks are usually effected by environment temperature,operation temperature,equpment,bonding material etc. The buyer or the customers could contact our R&D department if they have any problems before using.Once the customers decide to use the goods,the seller is only responsible for the parameters of the goods,but is not responsible for the downstream products several month later.
3.This product uses special hot melt adhesive equipment. The operation temperature is lower than 200ºC in generally,otherwise easy to decompose or even carbonized hot melt adhesive. Clean up long-working hot melt or carbonized tank with cleaning oil.
4.Gloves should be worn when operating to avoid scalding. The tank should be well-covered to avoid the dirt falling. the principle of "first use" and "how much melting" should be followed to ensure the bonding effect of hot melt adhesive.
5.This product should be stored far away from heat source, no direct sunlight, clean and dry room. The storage period of products is one year in generally. It needs to be tested again after the storage period is exceeded.
6.Because of the color of raw materials, each batch of products may have some color difference, but not affect its adhesion performance7.For further details or technical questions, please contact us.
